Βipolar electrosurgical unit Surtron HP 400 Watt Argon Ready

Αγαπημένα

Αγαπημένα

Βipolar electrosurgical unit Surtron HP 400 Watt Argon Ready
SURTRON 400 HP is a bipolar electrosurgery unit, which can be used to simultaneously perform monopolar and bipolar surgery in application fields which require high precision and reliability.

Double activity operation
Two output channels for monopolar cutting
Two independent setting and output channels for monopolar coagulation more frequently

Controlled cutting procedures
Cutting currents for eschar free incision
Cutting current with selectable coagulating property for bleeding-controlled dissection
Low capacitive coupling by current endoscopic procedures Slow BLEND

Double procedures subsidiaries coagulation
SPEEDY Coag Coag DEEP ** * and two operators
SPRAY COAG achievable with handpiece or pedal

Wide bipolar features
Bipolar cutting with bleeding control
Cutting current Slow BLEND
Start and Stop automatic activated separately

Total safety for patient and surgeon
Acceptability of contact impedance between the patient’s body and the neutral plate constantly verified by the electronic control Skin Plate Electronic Control called SPEC
Continuous monitoring of leakage current
Change in automatically compensated mains voltage before starting the RF power output

Custom procedures
Independent choice of coagulation currents and power levels of each of the two operators
Ten configurable personal procedures and immediately recallable

Conduct of extensions and signal connection
outputs for connections driven argon plasma units and smoke aspirator

Automatic self-diagnosis with Surtron 400 hp
Automatic diagnostic control of the actual complete electronic drive functionality and accessories connected and coded report of found failures

* Coag SPEEDY is also called Fulgurate or Forced
** Coag DEEP is also called Pin Point, Dessicate or Soft

Features
Max output power monopolar pure CUT
400 W / 300 Ω
Max output power monopolar cut-coag CUT80%
300 W / 300 Ω
Max output power monopolar cut-coag CUT60%
250 W / 300 Ω
Max output power monopolar cut-coag CUT40%
200 W / 300 Ω
Max output power monopolar cut ENHANCED
250 W / 500 Ω
Max output power monopolar cut-coag BLEND
250 W / 300 Ω
Max output power monopolar coag SPEEDY
120 W / 500 Ω
Max output power monopolar coag DEEP
120 W / 200 Ω
Max output power monopolar coag SPRAY
120 W / 2000 Ω
Max output power monopolar coag SPRAY ARGON
120 W / 2000 Ω
Max output power bipolar CUT
120 W / 50 Ω
Max output power bipolar cut-coag CUT80%
120 W / 50 Ω
Max output power bipolar cut-coag CUT60%
120 W / 50 Ω
Max output power bipolar cut-coag CUT40%
100 W / 50 Ω
Max output power bipolar cut-coag BLEND
120 W / 150 Ω
Max output power bipolar coag COAG
120 W / 50 Ω
Vessel sealing
200 W / 50 Ω
Working frequency Monopolar / Bipolar
425 kHz / 525 kHz
Patient circuit
F
Selectable input voltage
115-230 Vac
Mains frequency
50/60 Hz
Electrical input power
1000 VA
Size WxHxD
470 x 150 x 400 mm
Weight
17.5 Kg

Controls
Patient/Plate circuit monitoring
Output power monitoring
Self check control
H.F. Leakage currents control
Compensation of mains fluctuation

Safety
EN60601-1
EN60601-1-2
EN60601-2-2
Level of protection provided by housing: IP21
Electrical classification: CF
MDR 2017/745/UE Class: II b